PW-250B_E
Features
- High Power density, 250W in 4.1″ x 2.1″ footprint.
- Altitude during operation: ITE up to 5000m.
- 3 years warranty.
- Input range : 90 – 264VAC ( Refer to derating curve).
- Frequency : 47 – 63Hz.
- Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load.
- Inrush current : < 50A peak @115VAC; < 100A peak @230VAC cold start @25°C.
- Input current (rms) : 2.8A @115VAC; 1.4A @230VAC max.
- Efficiency : > 93% typical @ 80% load, 230VAC.
- Touch current : < 100uA @264VAC.
- Maximum output power (Po) : 250Watts with forced air cooling
- Hold-up time : > 10ms typical 80%@full load, 115VAC
- Short circuit protection : Auto-recovery
- Over load protection : 105% to 150% maximum rating, Auto-recovery
- Over voltage protection : latch-off
250W Enclosed Power Supplies
This series of 250W Enclosed Power Supplies are design for ITE & industrial applications.
The range features a Universal AC Input of 90 – 264VAC, 47 – 63Hz with active PFC >0.90 @ 230VAC and full load and have typical efficiency of >93% at 80% load.
Output range for this series 12- 48VDC and 0A minimum load which features low ripple and noise (380mV p-p Max.) and has in-built protection for overload, OVP and SCP. Output regulation is +3%/-3% Max.
This series meets safety requirements to EN62368-1 with UL, CSA, TUV and CB approvals and complies with EMC standards EN55032 Class B, EN55024 and FCC Part 15 B. The operating temperature range is 0 to +70°C (refer to derating curve).
This power supply is compact and has dimensions of 105.4 x 58.2 x 41.5mm and achieves full output power with convection or force air cooling options. The series also features JST input and output connectors.
This series is designed to cover a wide range of modern applications. These include, but are not limited to office equipment, IoT equipment, industrial machines and consumer products. 3 year warranty.
Products in the Series
| Series | Part Number | Output Power (W) | Input Voltage | Output Voltage (VDC) | Output Current (A) |
|---|