PW-M140A2

Features

  • Medical Approvals to EN6060-1 (2 x MOPP, BF rated)
  • Touch current less than 100uA
  • 3-prong IEC 320-C14 (Class I) Input Connector
  • ≦ 0.15W No Load Input Power
  • Input range : 90 – 264VAC, frequency 47 – 63Hz
  • Power Factor : > 0.90 @230VAC @full load
  • Efficiency : > 89% (Average) @ 115/230VAC
  • Short circuit protection : Auto-recovery
  • Over load protection : 110% to 150% maximum power, Auto-recovery
  • Over voltage protection : Shutdown and latch off, AC recycle
  • 3 Year Warranty

140W Medical Desktop Adapter Power Supplies:

This series of 140W Medical Desktop Adapter Power Supplies are designed for medical applications.

These products feature a Universal AC Input of 90 – 264VAC, 47 – 63Hz with a power factor of >0.90 (230VAC, full load). The input is provided by an IEC320-C14 (Class I) input connector.

These adapters have single outputs in the range 12 – 54VDC. The average efficiency is >89% and no load power consumption <150mW. The output features low ripple and noise (280mV p-p Max) and has in-built protection for OCP, OVP and SCP. Ouput regulation is +5%/-5% max. This product has a 1.0M output cable which can be fitted with a range of industry standard plugs. In addition to standard connectors these units can also be supplied with a bare ended output cable.

This power supply meets medical safety requirements to EN60601-1 (2 x MOPP, BF rated) with UL/cUL, TUV and CB approvals. They comply with EMC standards EN60601-1-2, EN55011 Class B and FCC Part 18 Class B. The operating temperature range of -20 to +60°C (derate linearly 2.5% per degree from 41 to 60 degrees) makes these products suitable for indoor and protective environment use.

This unit has dimensions of 170 x 64.8 x 38.5mm and features a black plastic case.

This range of 140W Medical Desktop Adapter Power Supplies is designed to cover a wide range of modern medical applications. These include, but are not limited too, diagnostic and analytical equipment and devices.

Products in the Series

SeriesPart NumberOutput Power (W)Input VoltageOutput Voltage (VDC)Output Current (A)