PW-200A3

200W Desktop Adapter Power Supplies:

This series of 200W Desktop Adapter Power Supplies are designed for general applications.

These products feature a Universal AC Input of 90 – 264VAC, 47 – 63Hz with a power factor of >0.90 (230VAC, full load). The input is provided by an IEC320-C14 (Class I) input connector.

These adapters have single outputs in the range 12 – 48VDC. They meet the efficiency requirements of DoE Level VI and ErP Tier 1, The average efficiency is >88% and no load power consumption <210mW. The output features low ripple and noise (300mV p-p Max) and has in-built protection for OCP, OVP and SCP. Ouput regulation is +5%/-5% Max. This product has a 1.0M output cable which can be fitted with a range of industry standard plugs. In addition to standard connectors these units can also be supplied with a bare ended output cable.

This power supply meets safety requirements to IEC/EN/ETL62368-1 with UL, CSA, TUV and CB approvals. They comply with EMC standards EN55032 Class B and FCC Part 15 Class B. The operating temperature range of -20 to +60°C (derate below zero degrees and above 40 degrees) makes this product suitable for indoor and protective environment use.

This unit has dimensions of 188.5 x 104.5 x 60mm and features a black plastic case. Cooling is provided with an internal 40mm fan. Other colour variations are available based on minimum order quantities.

This range of 200W Desktop Adapter Power Supplies is designed to cover a wide range of modern applications. These include, but are not limited too, industrial devices, communications equipment, office equipment, IoT equipment, gadgets and consumer products. For higher volume requirements output voltage and connectors can be changed to suit requirement.