PW-150B_CSBX

Features

  • Both ITE & Medical Approvals.
  • High Power density, 150W in 3″ x 2″ footprint.
  • Medical applications Protection: Means of Patient Protection ( MOPP).
  • Altitude during operation: ITE & Medical Below 5000m.
  • Meet Medical BF rated.
  • Medical safety approved Class I and Class II.
  • Main output Power ON LED indicators.
  • No load Power consumption < 150mW
  • 3 year warranty.
  • Input range : 90 – 264VAC.
  • Frequency : 47 – 63Hz.
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load.
  • Inrush current :<50A peak @115VAC; <100A peak @230VAC cold start @25°C.
  • Input current (rms) : 2A @115VAC; 1A @230VAC max.
  • Efficiency : > 92% typical @full load, 230VAC.
  • Touch current < 100uA @264VAC.
  • Maximum output power : 150Watts forced air, 100Watts convection cooling.
  • Hold-up time : > 10ms typical @full load, 115VAC.
  • Short circuit protection : Auto-recovery.
  • Over power protection : 105% to 160% maximum rating, Auto-recovery.
  • Over voltage protection : Latching type. AC Recycle.

150W Open Frame/Enclosed/U-Channel Medical Power Supplies

This versatile series of 150W Open Frame/Enclosed/U-Channel Medical Power Supplies are design for Medical, ITE & industrial applications.

The range features Universal AC Input of 90 – 264VAC, 47 – 63Hz with active PFC and have a typical efficiency of >92%.

The output range for this series is 12 – 54VDC with 0A minimum load which features low ripple and noise (360mV p-p) and has in-built protection for overload, OTP, OVP and SCP. Output regulation is +3%/-3%.

This series is designed for both medical and ITE applications and meets medical safety to EN60601-1 and general safety to EN62368-1 with UL, cUL, TUV and CB approvals. It complies with EMC standards EN60601-1-2, EN55011, EN55032 Class B, EN55035, FCC Part 15 B and FCC Part 18 B.

This power supply is compact and has dimensions of 76.2 × 50.8 × 31.0 mm (Open Frame), 90.6 × 64.0 × 39.2 mm (Enclosed) &  90.6 × 64.0 × 38.0 mm (U-Channel) and achieves full output power with convection or force air cooling options. The series also features JST input and output connectors. The operating temperature range of 0 to +70°C, (refer to derating curve).

This series is designed to cover a wide range of modern applications. These include, but are not limited to office equipment, IoT equipment, analytical equipment, industrial machines and consumer products for both medical and ITE applications. 3 year warranty.

Products in the Series

SeriesPart NumberOutput Power (W)Input VoltageOutput Voltage (VDC)Output Current (A)