A08210

210W Desktop Adapter Power Supplies:

This series of 210W Desktop Adapter Power Supplies are designed for use in both ITE and Medical applications.

These products feature a Universal AC Input of 90 – 264VAC, 47 – 63Hz with a power factor of >0.90 (230VAC, full load). The input is provided via an IEC320-C14 (Class I) connector.

These adapters have single outputs in the range 12 – 48V DC. They meet the efficiency requirements of DOE LEvel VII and EU ErP with typical average efficiency >88%. The no load power consumption is <150mW. The output features low ripple and noise (150mV p-p max) with regulation of +5%/-5%. Outputs include in-built protection for short circuit, overload, over voltage and over temperature.

This power supply meets medical safety requirements to EN60601-1 (2 x MOPP) and general safety to IEC/EN/ETL62368-1 with UL, CSA, TUV and CB approvals. These parts are suitable for BF applications with a touch current of <100uA. It complies with EMC standards EN60601-1-2, EN55011, EN55032 Class B, EN55035 Class B, FCC Part 15 Class B and FCC Part 18 Class B. The operating temperature range of -20 to +60°C (derate linearly 2.5% per degree from 41 to 60 degrees) makes this product suitable for indoor use.

This unit has dimensions of 170 x 85 x 44mm and features a black plastic case. Other colour variations are available based on minimum order quantities. This product has a 1.0M output cable which can be fitted with a range of industry standard plugs. In addition to standard connectors these units can also be supplied with a bare ended output cable.

This range is designed to cover a wide range of modern applications. These include, but are not limited too medical equipment, office equipment, IoT equipment, gadgets and consumer products. For higher volume requirements output voltage and connectors can be changed to suit requirement.