PW-150B_U
Features
- High Power density, 150W in 2″ x 4″ footprint
- 100% Burn-in and Hi-pot tested
- 3 year warranty
- Input range : 90 – 264VAC
- Frequency : 47 – 63Hz
- 150Watts Single Output
- Power Factor : > 0.9 @115/230VAC @full load
- Inrush current : < 45A peak @115VAC; < 90A peak @230VAC cold start @25°C
- Input current (rms) : 2.5A @115VAC; 1.25A @230VAC max.
- Efficiency : > 87% @average load, 115/230Vac
- Maximum output power (Po) : 150 Watts forced air, 100 Watts convection cooling
- Hold-up time : > 10ms typical @full load, 115VAC
- Short circuit protection : Auto-recovery
- Over load protection : 105% to 160% maximum rating, Auto-recovery
- Over voltage protection : Auto-recovery
150W U-Channel Power Supplies
This series of 150W U-Channel Power Supplies are design for ITE & industrial applications.
The range features Universal AC Input of 90 – 264VAC, 47 – 63Hz with active PFC and have a typical efficiency of >85%.
The output range for this series is 12 – 48VDC with 0A minimum load which features low ripple and noise (300mV p-p) and has in-built protection for overload, OTP, OVP and SCP. Output regulation is +3%/-3%.
This range meets safety requirements to EN62368-1 with UL, TUV and CB approvals. It complies with EMC standards EN55032 Class B and FCC Part 15 B.
This power supply is compact and has dimensions of 101.6 x 50.8 x 29mm and achieves full output power with convection or force air cooling options. The series also features JST input and output connectors. The operating temperature range of 0 to +70°C, (refer to derating curve).
This series is designed to cover a wide range of modern applications. These include, but are not limited to office equipment, IoT equipment, industrial machines and consumer products. 3 year warranty.
Products in the Series
| Series | Part Number | Output Power (W) | Input Voltage | Output Voltage (VDC) | Output Current (A) |
|---|