Conexa Tech Solutions
MENU

B46600E

Features

  • High Power density, 600W in 6″ x 4″ footprint.
  • Altitude during operation: ITE Below 5000m. & Medical Below 3000m.
  • No load Power consumption < 500mW (for 5Vsb standby mode)
  • Meet RoHS requirement
  • 3 year warranty
  • Input range : 90 – 264VAC (Refer to derating curve)
  • Frequency : 47 – 63Hz. RoHS compliant
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load.
  • Inrush current :<40A peak @115VAC; <80A peak @230VAC cold start @25°C. U-Channel type
  • Input current (rms) : 8A @115VAC; 4A @230VAC max.
  • Efficiency : > 93% typical @half load, 230VAC.
  • Touch current < 100uA @264VAC.
  • Maximum output power : 600Watts forced air, 300/340Watts convection cooling.
  • Hold-up time : > 10ms typical @full load, 115VAC.
  • Short circuit protection : Auto-recovery.
  • Over power protection : 105% to 130% maximum rating, Auto-recovery.
  • Over voltage protection : Latching type. AC Recycle or SD pin is reset.
  • Over temperature protection : Latching type. AC Recycle or SD pin is reset.
  • Standby and FAN output supply
  • Remote control (Inhibit) function
Download datasheet
Contact Us

600W Open Frame Industrial Power Supplies

This series of 600W Open Frame Industrial Power Supplies are designed for industrial applications.

These products feature a Universal AC Input of 90 – 264VAC, 47 – 63Hz, have a typical efficiency of >90% and no load energy consumption of <500mW (for 5Vsb standby mode) and active PFC >0.90 @ 230VAC and full load.

Output range of 12 – 48VDC and 0A minimum load which features low ripple and noise (300mV p-p Max.) and has in-built protection for over temperature overload, OVP and SCP. output regulation is +3%/-3% Max.

This series meets safety requirements to EN62368-1 with UL, CSA, TUV and CB approvals and complies with EMC standards EN55032 Class B, EN55035 and FCC Part 15 B.

Unit dimensions for this product range is 152.4 x 101.6 x 42.0mm and achieves full output power with convection or force air cooling options. The series also features terminal block input and output connectors. The operating temperature range is -20 to +70°C (refer to derating curves).

This series is designed to cover a wide range of modern applications. These include, but are not limited to office equipment, IoT equipment, industrial machines and consumer products.

Products in the Series

SeriesPart NumberOutput Power (W)Input VoltageOutput Voltage (VDC)Output Current (A)